Skip to main content
Smocking Guide

Interactive smocking plate chapter

Snowflake Trellis Medallions

Six-ray snowflakes inside open diamonds

A six-ray snowflake is charted inside every trellis diamond with a knotted center. The chapter separates the structural smocking from the surface embroidery (Straight stitch, French knot) added after the pleats have been stitched and blocked.

Difficulty
intermediate
Rows
7
Repeat
8 pleats
Confidence
confirmed
1

Finished stitched sample

Rendered 33-pleat stitched sample · fabric relief follows the charted catch points

This is an instructional rendering generated from the plate data, not a photograph.

2

Pleated fabric and grid

R1R2R3R4R5R6R7ONE REPEAT · 8 PLEATS
Front view after pleating: gathering threads remain in the fabric, but pleater needles do not. The dashed box isolates one declared repeat.
3

Where the motif appears

1 · Blank pleats
12
2 · Foundation in progress
3 · Finished repeat

First complete the structural courses shown on the pleated grid. After blocking, work the surface motif in this order: Make the center knot. Work six equal straight-stitch rays. Add short branches near the end of each ray.

  • Make the center knot.
  • Work six equal straight-stitch rays.
  • Add short branches near the end of each ray.
4

Needle path for one complete repeat

R1R2R3R4R5R6R71234567891234ONE REPEAT
1Cable on gathering row 1
Work left to right.
2Open motif diamonds · upper closures
Work left to right.
3Open motif diamonds · lower closures
Work left to right.
4Cable on gathering row 7
Work left to right.
ESurface embroidery · work last
Make the center knot. Work six equal straight-stitch rays. Add short branches near the end of each ray.
Dashed line = hidden travel inside the pleat.
⌒Arc = catch the marked pleat pair together.
Level stitch at a peak or trough = turn closure.
Enlarged working repeat · 9 pleats shown

Thread colors

  • Frame

    #6b8a9e

  • Field

    #7a3f45

  • Snow

    #769db7

  • Accent

    #c4a35a

5

How the pattern repeats across the full width

Each ending boundary is also the next starting boundary. Continue the working thread across the full row.
  1. Mark every 8 pleats for the structural and embroidery repeat.
  2. Complete and block the structural smocking across the full width before beginning surface embroidery.
  3. Carry a continuous stem only where the motif chart connects it; end isolated flowers, knots, and fills securely on the wrong side.
6

Frame-by-frame stitch sequence

R1R2R3R4R5R6R7P1P2P3P4P5P6P7P8P9

Sequence scope: The first sequence covers the structural smocking. The separate embroidery sequence then reveals all 19 normalized motif elements in their charted order.

Surface embroidery · after blocking

Motif sequence

7

Common mistakes and fixes

Stitches pulled too tightly

Looks like: Pleats pinch and the design cannot open after blocking.

Correct: Ease the working thread until every pleat fold stays rounded.

Unpick? Unpick if the fabric remains distorted after gentle easing.

Skipped pleat

Looks like: The repeat widens suddenly and later vertices no longer align.

Correct: Mark repeat boundaries and count the next pleat before every change of direction.

Unpick? Return to the skipped pleat; do not compensate in a later repeat.

Uneven stitch depth

Looks like: A level course wanders or diagonal steps have different lengths.

Correct: Catch the same shallow bite on the crown of every pleat.

Unpick? Only the visibly uneven section.

Lost repeat position

Looks like: A motif ends between the intended boundary markers.

Correct: Pause at each boundary and compare the ending point with the printed repeat map.

Unpick? Unpick to the last verified boundary.

Embroidery added before blocking

Looks like: Motifs distort or pull apart when the smocked panel is stretched to its finished width.

Correct: Remove the surface work, block the structural smocking, then transfer the motif centers again.

Unpick? Yes when the motif prevents even blocking.

Motif center drifts

Looks like: Flowers or figures no longer sit inside their intended repeat windows.

Correct: Mark every 8-pleat motif center after blocking and verify the first complete repeat.

Unpick? Unpick only the misplaced surface element.

8

Finished garment applications

winter bishop

Center a complete embroidered motif on the principal winter bishop line and preserve clear space around raised stitches.

holiday yoke

Center a complete embroidered motif on the principal holiday yoke line and preserve clear space around raised stitches.

sampler

Center a complete embroidered motif on the principal sampler line and preserve clear space around raised stitches.

These are placement diagrams, not photographs of completed garments.

10

Interactive digital guide

Toggle graph views and colorsOpen the keyboard-operable sequenceReview repeat boundaries

Use Tab to move through graph, sequence, colorway, and print controls. Wide diagrams scroll horizontally on small screens without widening the page.